ISR Router WAN Performance & Throughput

WAN Router Throughput 

• 1941/2901 - up to 25Mbps
• 2911 - up to 35Mbps
• 2921 - up to 50Mbps
• 2951 - up to 75Mbps
• 3925 - up to 100Mbps
• 3945 – up to 150Mbps

VSS Cisco Switch 4500 Configuration

VSS Configuration Cisco 4500 Switch

1.  Cisco Catalyst 4500-E Series Switches with Cisco Catalyst Supervisor Engine 7-E.
2. Create VSL Link between two switches.VSS members are connected by virtual switch
   links (VSLs) using standard Gigabit or 10 Gigabit Ethernet
3. Use Cisco IOS-XE Software 3.0 and above


Step 1.:   Assigning Virtual Switch Domain and Switch Numbers
-------------------STEP-1------------------------------------
SW1 Configuration
*****************

SW1(config)#switch virtual domain 10
SW1(config-vs-domain)#switch 1

===================================

SW2  Configuration
******************

SW2(config)#switch virtual domain 10
SW2(config-vs-domain)#switch 2
_____________________________________________________________

Step 2 :   Configuring VSL Port Channel
-----------------STEP-2----------------------
SW1 Configuration
*****************

SW1(config)#int port-channel 6
SW1(config-if)#switchport
SW1(config-if)#switch virtual link 1
SW1(config-if)#no shut
=====================================
SW2  Configuration
******************

SW2(config)#int port-channel 10
SW2(config-if)#switchport
SW2(config-if)#switch virtual link 2
SW2(config-if)#no shut

______________________________________________________


Step 3 :   Configuring VSL Port Channel
----------------STEP-3---------------------------------
SW1 Configuration
*****************

SW1(config)#int range gig1/1 - 2
SW1(config-if-range)#switchport mode trunk
SW1(config-if-range)#channel-group 6 mode on

=============================================
SW2  Configuration
***************

SW2(config)#int range gig4/47 - 48
SW2(config-if-range)#switchport mode trunk
SW2(config-if-range)#channel-group 10 mode on

_______________________________________________________

Step 4 :   Converting the Switch to Virtual Switch Mode
----------------STEP-4-------------------------
SW1 Configuration
*****************
SW1#switch convert mode virtual

============================================
SW2  Configuration
***************
SW2#switch convert mode virtual


++++++++++++++++++END++++++++++++++++++++++

Cisco Nexus 7k F1, F2, F3 & M1, M2 module

Nexus Switch 7K cards feature support

FXS card configuration for FAX machine.

FXS configuration for FAX machine.

VIC3-2FXS/DID

Do Voice PRI Configuration.

Follow this link for PRI configuration

http://cisconetlabs.blogspot.in/2014/07/pri-voice-card-configuration_8.html

after the PRI configuration , do the FXS card configuration.

voice-port 0/2/1

 cptone IN

 description FXS FAX 42260001

 station-id number 42260001

 caller-id enable

 !

!
dial-peer voice 112 pots
 description FAX 42260001
 destination-pattern 42260001
 incoming called-number 42260001
 port 0/2/1

VOICE Number Translation Rule

VOICE Number  Translation Rule

IP Phone Three digit number for internal use

Eight Number DID use for outside call

-------------------------------------------

configure IP Phone ...

voice register dn  1

 number 001

 call-forward b2bua busy 42260000 

 call-forward b2bua noan 42260000 timeout 20

 name Reception

 mwi

voice register pool  1

 id mac 501C.BFFD.CFC9

 type 9951

 number 1 dn 1

 codec g711ulaw

 no vad

 

!

voice translation-rule 1

 rule 1 /^42260\(...\)/ /\1/

 rule 2 /^0\(..\)/ /422600\1/

!

voice translation-profile 3Digit-to-DID

 translate calling 1

!

Voice translation-profile DID-to-3Digit

 translate called 1

!

dial-peer voice 200 pots

 translation-profile incoming DID-to-3Digit

 translation-profile outgoing 3Digit-to-DID

 destination-pattern 9T

 incoming called-number .

 direct-inward-dial

 port 0/0/0:15

!

!

Create Profile command is very important for all type of IP phone registration and update.

voice register global

   create profile