PRI Voice Card Configuration

PRI Voice Card Configuration.

Card Detail:

VWIC3-2MFT-T1/E1 - 2-Port RJ-48 Multiflex Trunk - T1/E1 on Slot 0 SubSlot 0

 -------------------------------------------------------------------------------------------------

card type e1 0 0

!

no aaa new-model

network-clock-participate wic 0

network-clock-select 1 E1 0/0/0

 

!

isdn switch-type primary-net5

!

(NO -CRC 4  I used for BHARTI ISP INDIA)

 controller E1 0/0/0

 framing NO-CRC4

 pri-group timeslots 1-31

!

interface Serial0/0/0:15

 no ip address

 encapsulation hdlc

 isdn switch-type primary-net5

 isdn overlap-receiving

 isdn incoming-voice voice

!

(If you have IP phone , do also config this)

 dial-peer voice 200 pots

 translation-profile incoming DID-to-3Digit    /// Number Translation

 translation-profile outgoing 3Digit-to-DID  /// Number Translation

 destination-pattern 9T  ///all outside dial number start with 9 Number

 incoming called-number .

 direct-inward-dial

 port 0/0/0:15